Mr. Hasselhoff
07-18-2006, 02:00 AM
The problem: You have a computer, your friend has a
computer (http://www.i-hacked.com/#), you both have a broadband connection (http://www.i-hacked.com/#), and you make use of Skype or
like the voice chat in MSN or something like this - And - you're sick and tired
to sit by the computer all the time when you talk. And you might even sit with
one of these ridiculous headset (hmm, yes I also have one) on your head just
because the echo cancellation feature isn't that great in reality.
The Solution: Build a Skype phone out of the old wireless phone you have just laying around
Cost $0.
Material used: one wireless phone, and one 3.5mm to 3.5mm plug (cut in half).
Tools used: screwdriver, knife, soldering iron.
Reposted with permission from: http://www.jarnaker.com (http://www.jarnaker.com/) Thanks for the Great Article!
A year ago or so I tried to connect a professional headset from Plantronics to my computer just because they’re so damn good and fit perfect. Well, I did get it to work after having a couple of boxes in-between the computer and the headset, but I was still tied to the computer. Now, I’ve seen some other devices around that basically give you an handset to connect to the USB port and then you can use that. Well, you’re still tied to the computer huh? No fun. Then I read in a local magazine (Veronica magazine here in the Netherlands) about Siemens making a
DECT USB adapter (http://www.siemens.com/index.jsp?sdc_rh=null&sdc_flags=null&sdc_sectionid=0&sdc_secnavid=0&sdc_3dnvlstid=&sdc_countryid=0&sdc_mpid=0&sdc_unitid=999&sdc_conttype=2&sdc_contentid=1161213&sdc_langid=1&sdc_pnid=&) so that you can connect your DECT phone to the computer - and I though Wow! that’s what I need. Well, €119 for another toy that I’ll use like not that often? I don’t think so. But hey, I have an old Siemens Gigaset 3010 phone laying around that my children play with (’cause the 2 key was a bit broken), I wonder if I can use that one? So I did.
http://www.i-hacked.com/images/stories/skypephone/IMG_4225-croppedsmall.jpg
The victim
So, how did I do it?
Not that simple at first, but very much simpler at the end. I started with opening the base station (Duh!) to see what chipsets (http://www.i-hacked.com/#) were in it. I was hoping for like an RF part a couple of lines on the circuit board and then a telephone circuit. Tji fick jag! No of course not. As any standard electronics they make use of a whole bunch of circuits, so I started looking up on the internet what they did and again - nothing to be
found. Then I decided to make use of the highly scientific method Trial and Error and hoping for a bit of good luck.
By having the phone off hook I carefully inserted my little screwdriver here and there until a heard a click in the handset. And when I found that click I injected a signal from my MP3 player (http://www.i-hacked.com/#) - and it worked! Then reverse, by blowing in the handsets microphone I used the regular headphone for my MP3 player to see where I could ‘hear’ the phone. By grounding on wire and using the other as a probe I quickly found the spot next to the first spot.
<!-- google_ad_client = "pub-3578220303661847"; google_ad_width = 728; google_ad_height = 90; google_ad_format = "728x90_as"; google_ad_type = "text_image"; google_ad_channel ="3395072018"; //-->
http://www.i-hacked.com/images/stories/skypephone/IMG_4230small.JPG (http://www.i-hacked.com/images/stories/skypephone/IMG_4230.JPG)
Note the red (sound to the phone) and green (sound from the phone) circles on the board.
Then taking an 3.5mm to 3.5mm plug cut in half connecting L+R
and then attaching it or respective place (for in and out) making use of the
downside of the RF part as ground plane I ended up with this.
http://www.i-hacked.com/images/stories/skypephone/IMG_4232small.JPG (http://www.i-hacked.com/images/stories/skypephone/IMG_4232.JPG)
As you
can see I’ve used an unshielded cable, but it works perfect anyway!
http://www.i-hacked.com/images/stories/skypephone/IMG_4231small.JPG (http://www.i-hacked.com/images/stories/skypephone/IMG_4231.JPG)
So how did it work? Outstanding!!! Incoming sound in the handset is perfect. Outgoing sound is a bit on the loud side but that’s easy to adjust on the computer. It really feels like you’re talking on the phone and I have a 300m radius from the house that I can use. While chatting on MSN! Perfect!!!
So, what are my tips to you? Do you want to try it, but you don’t have an Gigaset 3010? The tips can give you is the following:
Check out Jarnaker's forums (http://www.jarnaker.com/siemensskype/siemens_skype_forum.htm), there you’ll find step by step instructions on how he did this.
Look at the picture above and you’ll see two
big capacitors (silver can with a black line on it) and a voltage controller
(black small box with five legs) in the lower right corner. Avoid this area!
If you connect your headphones or MP3 player here you will most likely fry
them. In any other base station you should find a similar area close to the
power input (red on mine).
Be prepared that if you connect anything in
the wrong place, even when trying to figure out where the signals are, you
can damage the phone, MP3 player or whatever you connect. That is a -might-,
and my experience is that it usually turns out fine. But be aware of it.
Avoid messing around in the RF (radio
frequency) box. The electronics here is veeery sensitive.
Even though my conversion went fine, I did
manage to fry some part of the actual telephone part. So I can’t use the
phone anymore for regular calls. But what the heck! It works for my purpose
perfect.
http://www.i-hacked.com/images/stories/skypephone/IMG_4233small.JPG (http://www.i-hacked.com/images/stories/skypephone/IMG_4233.JPG)
The finished phone.
computer (http://www.i-hacked.com/#), you both have a broadband connection (http://www.i-hacked.com/#), and you make use of Skype or
like the voice chat in MSN or something like this - And - you're sick and tired
to sit by the computer all the time when you talk. And you might even sit with
one of these ridiculous headset (hmm, yes I also have one) on your head just
because the echo cancellation feature isn't that great in reality.
The Solution: Build a Skype phone out of the old wireless phone you have just laying around
Cost $0.
Material used: one wireless phone, and one 3.5mm to 3.5mm plug (cut in half).
Tools used: screwdriver, knife, soldering iron.
Reposted with permission from: http://www.jarnaker.com (http://www.jarnaker.com/) Thanks for the Great Article!
A year ago or so I tried to connect a professional headset from Plantronics to my computer just because they’re so damn good and fit perfect. Well, I did get it to work after having a couple of boxes in-between the computer and the headset, but I was still tied to the computer. Now, I’ve seen some other devices around that basically give you an handset to connect to the USB port and then you can use that. Well, you’re still tied to the computer huh? No fun. Then I read in a local magazine (Veronica magazine here in the Netherlands) about Siemens making a
DECT USB adapter (http://www.siemens.com/index.jsp?sdc_rh=null&sdc_flags=null&sdc_sectionid=0&sdc_secnavid=0&sdc_3dnvlstid=&sdc_countryid=0&sdc_mpid=0&sdc_unitid=999&sdc_conttype=2&sdc_contentid=1161213&sdc_langid=1&sdc_pnid=&) so that you can connect your DECT phone to the computer - and I though Wow! that’s what I need. Well, €119 for another toy that I’ll use like not that often? I don’t think so. But hey, I have an old Siemens Gigaset 3010 phone laying around that my children play with (’cause the 2 key was a bit broken), I wonder if I can use that one? So I did.
http://www.i-hacked.com/images/stories/skypephone/IMG_4225-croppedsmall.jpg
The victim
So, how did I do it?
Not that simple at first, but very much simpler at the end. I started with opening the base station (Duh!) to see what chipsets (http://www.i-hacked.com/#) were in it. I was hoping for like an RF part a couple of lines on the circuit board and then a telephone circuit. Tji fick jag! No of course not. As any standard electronics they make use of a whole bunch of circuits, so I started looking up on the internet what they did and again - nothing to be
found. Then I decided to make use of the highly scientific method Trial and Error and hoping for a bit of good luck.
By having the phone off hook I carefully inserted my little screwdriver here and there until a heard a click in the handset. And when I found that click I injected a signal from my MP3 player (http://www.i-hacked.com/#) - and it worked! Then reverse, by blowing in the handsets microphone I used the regular headphone for my MP3 player to see where I could ‘hear’ the phone. By grounding on wire and using the other as a probe I quickly found the spot next to the first spot.
<!-- google_ad_client = "pub-3578220303661847"; google_ad_width = 728; google_ad_height = 90; google_ad_format = "728x90_as"; google_ad_type = "text_image"; google_ad_channel ="3395072018"; //-->
http://www.i-hacked.com/images/stories/skypephone/IMG_4230small.JPG (http://www.i-hacked.com/images/stories/skypephone/IMG_4230.JPG)
Note the red (sound to the phone) and green (sound from the phone) circles on the board.
Then taking an 3.5mm to 3.5mm plug cut in half connecting L+R
and then attaching it or respective place (for in and out) making use of the
downside of the RF part as ground plane I ended up with this.
http://www.i-hacked.com/images/stories/skypephone/IMG_4232small.JPG (http://www.i-hacked.com/images/stories/skypephone/IMG_4232.JPG)
As you
can see I’ve used an unshielded cable, but it works perfect anyway!
http://www.i-hacked.com/images/stories/skypephone/IMG_4231small.JPG (http://www.i-hacked.com/images/stories/skypephone/IMG_4231.JPG)
So how did it work? Outstanding!!! Incoming sound in the handset is perfect. Outgoing sound is a bit on the loud side but that’s easy to adjust on the computer. It really feels like you’re talking on the phone and I have a 300m radius from the house that I can use. While chatting on MSN! Perfect!!!
So, what are my tips to you? Do you want to try it, but you don’t have an Gigaset 3010? The tips can give you is the following:
Check out Jarnaker's forums (http://www.jarnaker.com/siemensskype/siemens_skype_forum.htm), there you’ll find step by step instructions on how he did this.
Look at the picture above and you’ll see two
big capacitors (silver can with a black line on it) and a voltage controller
(black small box with five legs) in the lower right corner. Avoid this area!
If you connect your headphones or MP3 player here you will most likely fry
them. In any other base station you should find a similar area close to the
power input (red on mine).
Be prepared that if you connect anything in
the wrong place, even when trying to figure out where the signals are, you
can damage the phone, MP3 player or whatever you connect. That is a -might-,
and my experience is that it usually turns out fine. But be aware of it.
Avoid messing around in the RF (radio
frequency) box. The electronics here is veeery sensitive.
Even though my conversion went fine, I did
manage to fry some part of the actual telephone part. So I can’t use the
phone anymore for regular calls. But what the heck! It works for my purpose
perfect.
http://www.i-hacked.com/images/stories/skypephone/IMG_4233small.JPG (http://www.i-hacked.com/images/stories/skypephone/IMG_4233.JPG)
The finished phone.