DaDominator
11-07-2006, 03:09 PM
First off your going to need to get linux on your USB Flash drive.
Getting Linux to run on a USB Drive may easily seem to be an overwhelming process, but we put together a very simple guide that an absolute novice could follow.
We successfully installed a distribution of Damn Small Linux on a Lexar 512mb Secure Disk USB 2.0 Jump Drive and it worked quickly and flawlessly. There's no guarantee that every USB Drive will boot Linux using this method (for example, the new Imation 256mb Wristband Drives would not work properly), but we feel a vast majority will work fine.
Things Needed to Begin
* USB Storage Device - (256mb or larger recommended using USB 2.0)
* PC that can boot from a USB Device (check your BIOS or your User Manual)
* Damn Small Linux (DSL) Distro
* Syslinux 3.11
* HP USB Disk Storage Format Tool
1.0 Formatting The USB Storage Device
1.1) Insert your USB Storage Device into an empty USB slot on your PC.
1.2) Download and Install the HP USB Disk Storage Format Tool. Once the usb disk storage format tool is installed, run it by double clicking its icon on the desktop.
Image
1.3) Use the following settings in the HP USB Disk Storage Format Tool
Image
* Device: The name and capacity of your storage device
* File system: FAT
* Volume label: Name it what you want (I chose LINUX)
* Confirm the Format by clicking Yes.
* Once the Format is complete it will give you a list of information about the file system, volume, etc. about your device. Click OK.
2.0 Extracting Necessary Files
2.1) Download and Extract the Damn Small Linux distro (dsl-embedded.zip) to your USB device using Win-Zip or any extraction software.
Image
2.2) Download and Extract all the files from syslinux-3.11 to a folder named Syslinux on your primary hard drive (mine is C:)
Image
2.3) Go to the Run Menu (Click Start> Run) and open the Command Prompt by entering cmd and pressing Enter (or Click OK).
Image
2.4) At the Command Prompt type cd c:\syslinux\win32 (substitute c: for the drive letter of your hard drive) and Press Enter
Image
Type syslinux.exe -f F: (F: reprents the drive letter of my USB Device. Yours may be different. GET THIS RIGHT). Press Enter.
Image
Type exit to close the Command Prompt
Image
3.0 Booting to Linux
3.1) Keep your USB Device plugged in and Reboot your PC.
3.2) Enter your BIOS setup (usually by pressing F2 or DEL) and set your Boot order to boot from the USB Device First. Exit your BIOS and Save the Changes. Since there are MANY different BIOS you must figure out on your own if your PC supports booting from USB.
If all goes well you'll be presented with Damn Small Linux's Boot Screen. Press Enter and continue the boot process.
Now you'll need to navigate with the Linux file explorer over to the main network drive (in some cases this will be the C: drive). You must be able to at least see the C:\ directory. If not...then you suck at hacking..figure it out. Once your there. Goto the windows directory (or winnt) and then system32 and then config. Copy all the files that start with SAM to your USB flash drive and your done! Go home and paste the file contents here and I'll get you the passwords.
Getting Linux to run on a USB Drive may easily seem to be an overwhelming process, but we put together a very simple guide that an absolute novice could follow.
We successfully installed a distribution of Damn Small Linux on a Lexar 512mb Secure Disk USB 2.0 Jump Drive and it worked quickly and flawlessly. There's no guarantee that every USB Drive will boot Linux using this method (for example, the new Imation 256mb Wristband Drives would not work properly), but we feel a vast majority will work fine.
Things Needed to Begin
* USB Storage Device - (256mb or larger recommended using USB 2.0)
* PC that can boot from a USB Device (check your BIOS or your User Manual)
* Damn Small Linux (DSL) Distro
* Syslinux 3.11
* HP USB Disk Storage Format Tool
1.0 Formatting The USB Storage Device
1.1) Insert your USB Storage Device into an empty USB slot on your PC.
1.2) Download and Install the HP USB Disk Storage Format Tool. Once the usb disk storage format tool is installed, run it by double clicking its icon on the desktop.
Image
1.3) Use the following settings in the HP USB Disk Storage Format Tool
Image
* Device: The name and capacity of your storage device
* File system: FAT
* Volume label: Name it what you want (I chose LINUX)
* Confirm the Format by clicking Yes.
* Once the Format is complete it will give you a list of information about the file system, volume, etc. about your device. Click OK.
2.0 Extracting Necessary Files
2.1) Download and Extract the Damn Small Linux distro (dsl-embedded.zip) to your USB device using Win-Zip or any extraction software.
Image
2.2) Download and Extract all the files from syslinux-3.11 to a folder named Syslinux on your primary hard drive (mine is C:)
Image
2.3) Go to the Run Menu (Click Start> Run) and open the Command Prompt by entering cmd and pressing Enter (or Click OK).
Image
2.4) At the Command Prompt type cd c:\syslinux\win32 (substitute c: for the drive letter of your hard drive) and Press Enter
Image
Type syslinux.exe -f F: (F: reprents the drive letter of my USB Device. Yours may be different. GET THIS RIGHT). Press Enter.
Image
Type exit to close the Command Prompt
Image
3.0 Booting to Linux
3.1) Keep your USB Device plugged in and Reboot your PC.
3.2) Enter your BIOS setup (usually by pressing F2 or DEL) and set your Boot order to boot from the USB Device First. Exit your BIOS and Save the Changes. Since there are MANY different BIOS you must figure out on your own if your PC supports booting from USB.
If all goes well you'll be presented with Damn Small Linux's Boot Screen. Press Enter and continue the boot process.
Now you'll need to navigate with the Linux file explorer over to the main network drive (in some cases this will be the C: drive). You must be able to at least see the C:\ directory. If not...then you suck at hacking..figure it out. Once your there. Goto the windows directory (or winnt) and then system32 and then config. Copy all the files that start with SAM to your USB flash drive and your done! Go home and paste the file contents here and I'll get you the passwords.